Unsupported Screen Size: The viewport size is too small for the theme to render properly.

December 2017

5 Types of Workplace Safety Labels

5 Types of Workplace Safety Labels

Having proper signage or labeling in your workplace is an essential component of any workplace setup. Your employees, customers, and visitors should be aware of any danger that might occur in the workplace. The safety labels put up in any workplace must include GHS Pictograms. A pictogram is an image describing the risk at hand as well as a word stating the risk. Read on to find the five types of safety labels we shall cover in this article.

1. Machine safety labels

Machines and equipment should have a clear label indicating their use, user instructions, and any dangers involved. Regardless of its size, you should ensure that each machine is clearly labeled with all the necessary warnings and instructions. For instance, what are the effects of over-using the machine? How should you handle the machine? Should you wear gloves or not? These machine labels should be durable and able to withstand adverse temperatures.

2. Emergency start and stop labels

Clear warning labels should be put on machinery that is set up to start or stop automatically. The labels serve as a warning to the machine operator to be careful as the machine can start or stop automatically. The machine operator should be sure to come to a stop when the emergency stop labels show up. Quality machine labels are heat resistant and react mildly to chemical exposure. Therefore, look out for machine stop labels that use an aggressive adhesive that makes them long-lasting.

3. Building and facility labels

Various buildings and facilities have posted a good number of tags around the working place. These tags are meant to remind visitors and employees of the need to maintain some precautionary practices. For instance, you can tell your employees to watch their steps while walking on a slippery floor, or they should switch off their cell phones. The labels are meant to minimize injury cases.

4. Fire equipment labels

Fire equipment labels form a fundamental component of any working environment. Fire accidents are frequent and very unpredictable. It is, therefore, very crucial to have clear instructions stating what equipment to use in case of a fire outbreak. For instance, you should explicitly label the fire extinguisher placed on a wall. You should also use a pictogram describing how one should use the equipment to fight out the fire. It is also crucial that you clearly indicate the exit route in bold letters.

5. Chemical labels

In a factory setup, it is imperative to have clear chemical symbols stating what the chemical is, its use, and user instructions. In the directions, you should make sure to warn your employees on the dangers associated with that particular chemical.

A Final Thought:

When coming up with your safety labels, it is vital that you ensure that you are using the GHS classification system. GHS labels are a standardized danger communication system that every person should use in their workplace. For more information, there are some helpful resources on the ICC Compliance Center website.

6 Steps to Proper Biohazard Waste Disposal

6 Steps to Proper Biohazard Waste Disposal

The procedures for handling biohazard waste are relatively strict, but this is for the safety of workers and the general public. The use of biohazard labels is often needed to make sure everyone near the materials understands what is in the containers. Below are the six steps you need to take to dispose of biohazard waste properly.

1. Set Up Your Biohazard Containment

The containers used to store biohazard waste depends on the facility and their personal preferences. Services that generate a significant amount of biohazard waste, such as plasma and dialysis centers, tend to use cardboard boxes. These will have to be turned over and the bottom flaps secured tightly shut with tape. The tape will ensure the bottom does not fall out as you try and move the box.

2. Line Boxes With Red Biohazard Bag

Line the boxes with a bright red biohazard bag. Any other color can be mistaken for regular waste. Keep an accurate inventory to make sure there are always bags on hand. States vary on the requirements for bag thickness. Make sure these bags are within the guidelines demanded by your local area and state. Once you reach the weight limit, switch to a new box.

3. Clearly Mark Container for Biohazard Waste Only

The only waste you want entering these containers is specific biohazard materials. Sort out the items going to the incinerator and what does not need that particular step. Add the biohazard sharps to the red bag after securing them in a puncture-resistant container. Leave the specified amount of room at the top to avoid overfilling the container.

4. Tie the Biohazard Bag Shut

Bringing the edges of the bag up and pulling it out of the box should only be done after placing a pair of gloves over your hands. carefully grab the four sides of the bag and pull the bag up and free of the box. Twist the entire bag to completely close. Tie the open end of the bag and tape the knot shut. You need to have a complete seal on the bag.

5. Securely Close the Container

Place the sealed bag back down into the box. Tape the box shut and place it in a secure location. Continue this process until all bags fit in their respective boxes. Plastic disposable and reusable containers should be securely closed and locked according to specific device instructions.

6. Make Sure There Are Appropriate Biohazard Labels

After every container is secured shut, check the labeling. There need to be biohazard warnings that are readily visible on all boxes and containers holding these types of waste materials. You will have to add biohazard labels if there is not an adequate amount of markings on the containment devices.

Safety is essential when dealing with biohazard waste. Correct and visible labeling is one way to guarantee there is little chance of accidental contact.